Most of the solid brass hardware is protected with lacquer at the factory. Oil rubbed bronze is different. It is a chemically dark finish designed to mimic antiques. The colors vary from deep chocolate brown to dark gray with copper tones. This finish is fragile. Reacts to pollutants, extreme temperatures and common household cleaning solutions. Failure to do so may result in dull spots and damage. Requires special maintenance measures. Regular waxing is essential. Start this process the same day you fixture is installed. Learn how to properly clean an oil rubbed bronze faucet.
Required materials
- Soft, lint-free fabric
- clean towels
- Furniture wax
- clear wax paste
Cleaning and scratch repair
First, use a soft, lint-free cloth and cold water. Wipe the faucet. Remove dirt and residue from finishs. Dry immediately with a clean towel. Leaving water spots can damage the finish.
Check for scratches. Apply a thin layer of furniture wax to these areas. Use wax that matches the color of your faucet. Allow to dry for 10 minutes. Carefully wipe off the excess wax. The scratches should disappear.
“The color of the finishes varies from deep chocolate brown to dark gray with a copper undertone.”
Prevent Hard Water Stains
Apply a layer of clear wax paste. This step protects the fixture from damage caused by hard water. Make sure the faucet is completely dry before you begin. Apply a thick layer of clear wax over the entire finish. Let it set.
After drying, wipe the faucet with a soft, lint-free cloth. This brings out the shine. Keep the faucet as dry as possible after use. Sources like California Faucets and Clement Hardware emphasize this last step.
Why maintenance is important
Oil rubbed bronze lacquers can be affected by impurities and extreme temperatures. It can also react with household cleaning solutions. If you are not careful, the finish degrades. Waxing creates barriers. Protects against water spots and small scratches. It can extend the life of the fixture.
You may be wondering if using regular soap is the right thing to do. Avoid it. Soap leaves a residue. These residues attract dirt. They dull the finish. Stick to cold water and wax.
Final thoughts
This routine can give your faucet a whole new look. It retains its antique beauty. Don’t skip the waxing step. This is the only way to preserve the integrity of the oil rubbed bronze finish. Get started today. Your faucet will thank you.
